John Hunt is a professional angler! He has been fishing for the last 12 years, he loves to participate in fishing tournaments everywhere with his...Read more
Are you looking at the title and wondering why I would have to set up a magnetic brake on baitcaster? Well, that’s a good question, to be honest. Why would you do something without knowing its outcome, right?
Therefore, it is as essential as a brake in your vehicle. In this article, we will craft an indispensable skill, and that is how to set magnetic brake on baitcaster.
How To Set Magnetic Brake On Baitcaster Reel
Here’s your answer: a magnetic brake’s main job on a baitcaster reel is to help you avoid backlash tangles during fishing. Dealing with backlash tangles when fishing can be pretty annoying, and you might even lose a prized catch because of it.
Setting Up Magnetic Brake On Baitcaster Reels
In this section, we are going to learn how to set magnetic brake on baitcaster. After reading the guidelines from top to bottom, you won’t have any problem with setting a magnetic brake on baitcaster. So, without further ado, let’s get down to the main process:
- Step 1: Securing the Line
Securing the line is the easiest task in this process. All you need is a decent line for the spool. Then you will need to line it up with the spool.
- Step 2: Feed the Line
Here’s the first big step towards setting up the baitcasting reel, pass the line starting from the rod through the line guide. What you want to do here is lining up with the spool. It’s usually the opposite of the casting outcome.
- Step 3: Set Spool Tension
You will see a small dial on the side plate that’s the spool tension knob. In general, the drag and handle are placed on the same side, just like the tar. The first step of setting up the reel is adjusting the reel.
First and foremost, you need to hold the rods for around 2 hours and keep the inclination up at least 8–10-inch line comes out. After that, you will have to turn up the spool tension knob to make sure you can feel some light pressure.
Now, you need to press the thumb bar and let go of the lure. Make sure you drop off the lure slowly and release the pressure gently as long as the lure doesn’t fall by itself. You will have to reel up and repeat it if the lure doesn’t reach the ground in 2-3 seconds.
- Step 4: Set the Drag
Setting up the pool is essential, and the good news is it’s an easy-peasy job. The best solution is to get a scale and fix the pool to 6 to 8. As long as it doesn’t reach the proper weight, keep tying to the scale in the line. You can do it by uplifting down the drag setting.
Why Do You Need To Know Baitcaster Braking System?
- Baitcasting Reel Fundamentals
Baitcasting is not much of a complicated thing. In order to decrease memory, especially when it comes to larger ones, it utilizes a free-spinning spool. Also, you will be able to cast a lot more using lesser lines in the spool. Besides that, you can control these incredible drag systems by using the large star-shaped wheel placed behind its handle.
These were designed for hefty lines and bigger fish. You need to put your thumb straight above the spool and let the spool go free by distressing the thumb bar. After that, you can load the road. When releasing the thumb, you will see the spool starts rotating and giving you a line under the guides.
- Braking System On Baitcaster Reel
If you are new to fishing, it’s okay to have this question. In this section, we have described the reasons why you need a braking system in baitcaster. So, let’s get to know them.
Having a brake on your baitcaster will help you to slow down the spool when necessary. When casting baitcaster, you are going to see the spool has started spinning, and then you will be able to fix the level of friction you need the brakes to apply. If you don’t have a braking system, it will spin the spool much faster.
On the other hand, if you have it fully on, it will help you to slow the speed down. When the brakes are not on and the lure drops in the water, the spool is just going to keep spinning, and that’s what will cause a backlash. But if you have the brakes on, you won’t face such an issue.
We must let you know another thing; you may still get to deal with tangles in the spool even if you have the brakes on. If you are a beginner learning how to cast then, we would recommend you to have your brakes fully on.
However, with quality practice and experience, you will start to gain confidence, and then you can try turning them off. Having them off will help you to cast in longer distances. Listen, dear, the baitcaster braking system will allow you more control and, accuracy while fishing, and that will help you to fill your buckets. It will take a bit of practice to get used to it but once you do, you will feel a lot better. It’s more like riding a sports car after riding the old Toyota for a long time, you know what I’m talking about, right?
Fishing is an entertaining activity, and once you learn to get good at it, you will find it more enjoyable. To do that, you must get the basics of the braking system first.
As we have explained above, yeah, the magnetic braking system is pretty easy to get. And if you don’t want to deal with much struggle in the beginning, then it’s a good option. We hope after reading our article; now you fully understand how to set magnetic brake on baitcaster. Wishing you the best with your next fishing trip. Thanks for your reading.
John Hunt is a professional angler! He has been fishing for the last 12 years, he loves to participate in fishing tournaments everywhere with his favorite fishing gear. As a pro angler, he is sharing his valuable fishing guide with newbie anglers...More Posts