John Hunt is a professional angler! He has been fishing for the last 12 years, he loves to participate in fishing tournaments everywhere with his...Read more
Spooling is not an easy task. When fishermen are out fishing, they face this situation when the fish is biting non-stop. At these times, the worst thing that can happen to a fisher is line trouble. Almost every pro angler has experienced this. The Backlash, line twists, and other fishing line dilemmas can affect your trip.
How to spool a baitcaster? is a burning question for every newbie angler. Therefore, here are a few tips in this article to tell you about how you can spool yourself if there is no helping hand available at that time. Remember, it can be very intimidating, but you might get into trouble without using these fishing pro tips. Therefore, stick to the last of the article to know every detail about how to spool a baitcaster reel.
Steps on how to spool a baitcaster by yourself?
Here is a simple summary of the whole process of putting a fishing line on a baitcasting reel in a few days:
- Attach the reel to the baitcasting rod.
- Putting the fred lines inside the first hole of your fishing rod
- Feed the line inside the line guide of your baitcaster.
- Tie the line to the spool of your casting reel
- Trim of the extra line from the line end of the knot
- The spooling line will start on the reel with just turning a handle.
- Fill the spool until there is a gap of 1/8th inch left at the last.
This process will apply if you are using a monofilament or a fluorocarbon to occupy the baitcaster. However, instead of that, if you are using a braid, you can check the modified guide in this page.
Here is an elaborated version to tell you precisely what you need to do step-by-step while spooling a baitcaster:
Attach the reel to the baitcasting rod
Some experts use one line spooler that puts a line on the baitcaster. However, this is not necessary, especially when you can quickly achieve a similar effect while using rods instead of that.
Fred lines over the first hole of the rod
This is going to help you to insert the line into the baitcaster in the correct direction. This will also will help you to create tension into that while the process is ongoing.
Feed the line inside the line guide of your baitcaster
This is also very essential. You need to feed the line through the line guide of the reel. The line guide will always be moving from one side to another while you are spooling. Therefore, ensure that the lines are all filled evenly on the spool.
Tie the line to the casting reel spool
If the baitcaster you are using contains holes in the spool, thread it over the two of them. Then tie them with a double overhead knot. However, if the pool does not contain any holes, you better wrap it around the spool and tie it too with a double overhead knot too.
Trim off the extra line from the line end of the knot
This is a significant part cause if you don’t, it will stick out. Then it will keep getting in the way of the mainline during the process of spooling.
Starting the spooling process in the baitcaster by turning a particular handle
Now you should be ready to start spooling in the baitcaster. You should keep the tension maintained on the line when you are doing this. To avoid the line twisting, ensure the filler spools rotate in the similar direction, like the one on the baitcasting reel.
Spool the caster until it’s near about full
Do not fill the caster. Always leave a gap of 1/8th inch between the margins of the spool and the line. It will help to prevent any backlash.
So these are the elaborated step-by-step guide to spool a baitcaster. However, spooling it all by yourself without a helping hand is going to be more challenging. So,
How To Spool A Baitcaster Reel?
If you ask an experienced fisherman to tell you how to spool a baitcaster by yourself and without a buddy to give you a helping hand, they will always tell you about this method.
At first, you should put one pencil over the holes of the filler spool.
Now, step on a side of the pencil with a foot, and help the spool rotate freely as you will pull the line off on the reel.
Now run the line using your fingers before reaching the reel. This will help you to apply constant tension during the whole process.
Now here is how you can spool a baitcaster with braid?
This is a process that is also similar to what you have seen outlined earlier in the article. However, in place of filling the baitcaster spool, you will first fill it with the monofilament backing.
How much backing will you need?
Try to fill 1/4th inches of the caster spool with a backing line when you are trying to give backing to the baitcaster. This line as the base will not be going to get used. There are a few reasons to use a twofold backing. First, the monofilament is cheaper than the braids available in the market. Secondly, braids slip a lot if tied with the spool directly.
What is the process to spool baitcaster backing?
To put a backing, start spooling with a monofilament just as instructed above in the article. When you are done filling the reel near about 1/4th inch of the way, cut it, and then tie with the braid with an Albright knot.
What equipment do we need?
To effectively add a new line, you will need
- Monofilament line
- A pencil
- And an optional braided fishing line.
This is our guide to tell you a step-by-step process how to spool a baitcaster perfectly. This is the first way to avoid baitcaster backlash when you went fishing.
Also, this is the best way to spool your baitcasting reel by yourself safely. Try that now, happy fishing.
John Hunt is a professional angler! He has been fishing for the last 12 years, he loves to participate in fishing tournaments everywhere with his favorite fishing gear. As a pro angler, he is sharing his valuable fishing guide with newbie anglers...More Posts